[j-nsp] inline-jflow

[moki]

Thank you Graham,
I suspected that this is the case ...
Is there another way to overcome this problem ?
Because our netflow server connected to OOB management network which is
routed only via Fxp interface ...

On Thu, Sep 6, 2012 at 6:55 PM, Graham Brown
<juniper-nsp at grahambrown.info>wrote:

> Hi Moki,
>
> The export of flow data is not supported via an fxp interface. The fxp0
> interface does not have the hardware capabilities to handle this kind of
> operation.
>
> I had a similar customer query a while back; they could configure the
> export of flows via the fxp interface, however it never worked.
>
> I hope that this is of help,
> Graham
> --
> Graham Brown
> Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer>
> LinkedIn <http://www.linkedin.com/in/grahamcbrown>
>
> On Thu, Sep 6, 2012 at 1:05 PM, moki <vomoki at gmail.com> wrote:
>
>> Hello
>> Does anyone know if inline-jflow support to send traffic via fxp
>> interface.
>> I tried to configure inline-jflow with the configuration bellow when the
>> route to the destination is the fxp interface:
>> family inet {
>>                 output {
>>                     flow-server 88.88.88.1 {<-- routed via fxp
>>                         port 2055;
>>                         autonomous-system-type origin;
>>                         version-ipfix {
>>                             template {
>>                                 default-temp;
>>                             }
>>                         }
>>                     }
>>                     inline-jflow {
>>                         source-address 88.88.88.2;
>>                     }
>>                 }
>>
>> Is it possible ?
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>