[j-nsp] J2350 Basic IPv6 Configuration Issue

[Ben Dale]

Hi Xu,

Do you have the box in packet or flow-mode?

If it's in flow-mode, you'll need to configure:

set security forwarding-options family inet6 mode flow;  (or packet-based depending on what you want)

Cheers,

Ben

On 10/09/2012, at 2:34 PM, Xu Hu <jstuxuhu0816 at gmail.com> wrote:

> Hi Experts,
> 
> I have one J2350 box using below configuration, my question is that, why it
> cannot ping the other side?
> 
> xuhu> show configuration interfaces ge-0/0/0.1824
> vlan-id 1824;
> family inet {
>    address 10.254.125.138/30;
> }
> family inet6 {
>    address fd00:0:1:1824:2420:1218:afe:7d8a/64;
> }
> 
> xuhu> show configuration security forwarding-options
> family {
>    inet6 {
>        mode packet-based;
>    }
> }
> 
> xuhu> ping inet6 fd00:0:1:1824:2420:1218:afe:7d89
> PING6(56=40+8+8 bytes) :: --> fd00:0:1:1824:2420:1218:afe:7d89
> ping: sendmsg: No route to host
> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
> ping: sendmsg: No route to host
> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
> ^C
> --- fd00:0:1:1824:2420:1218:afe:7d89 ping6 statistics ---
> 2 packets transmitted, 0 packets received, 100% packet loss
> 
> xuhu> show ipv6 neighbors
> IPv6 Address                 Linklayer Address  State       Exp Rtr Secure
> Interface
> fe80::fa66:f2ff:fed2:ed00    f8:66:f2:d2:ed:00  stale       778 yes no
> ge-0/0/0.1824
> 
> Will appreciate for any comments.
> 
> Thanks and Regards,
> Hu Xu
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>