[j-nsp] J2350 Basic IPv6 Configuration Issue

[Xu Hu]

Actually I already configure the mode packet-based, also cannot work.

Thanks and regards,
Xu Hu

On 10 Sep, 2012, at 13:16, Ben Dale <bdale at comlinx.com.au> wrote:

> Hi Xu,
> 
> Do you have the box in packet or flow-mode?
> 
> If it's in flow-mode, you'll need to configure:
> 
> set security forwarding-options family inet6 mode flow;  (or packet-based depending on what you want)
> 
> Cheers,
> 
> Ben
> 
> On 10/09/2012, at 2:34 PM, Xu Hu <jstuxuhu0816 at gmail.com> wrote:
> 
>> Hi Experts,
>> 
>> I have one J2350 box using below configuration, my question is that, why it
>> cannot ping the other side?
>> 
>> xuhu> show configuration interfaces ge-0/0/0.1824
>> vlan-id 1824;
>> family inet {
>>   address 10.254.125.138/30;
>> }
>> family inet6 {
>>   address fd00:0:1:1824:2420:1218:afe:7d8a/64;
>> }
>> 
>> xuhu> show configuration security forwarding-options
>> family {
>>   inet6 {
>>       mode packet-based;
>>   }
>> }
>> 
>> xuhu> ping inet6 fd00:0:1:1824:2420:1218:afe:7d89
>> PING6(56=40+8+8 bytes) :: --> fd00:0:1:1824:2420:1218:afe:7d89
>> ping: sendmsg: No route to host
>> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
>> ping: sendmsg: No route to host
>> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
>> ^C
>> --- fd00:0:1:1824:2420:1218:afe:7d89 ping6 statistics ---
>> 2 packets transmitted, 0 packets received, 100% packet loss
>> 
>> xuhu> show ipv6 neighbors
>> IPv6 Address                 Linklayer Address  State       Exp Rtr Secure
>> Interface
>> fe80::fa66:f2ff:fed2:ed00    f8:66:f2:d2:ed:00  stale       778 yes no
>> ge-0/0/0.1824
>> 
>> Will appreciate for any comments.
>> 
>> Thanks and Regards,
>> Hu Xu
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> 
>