[j-nsp] SRX 5800 cluster reports 100% of CPU through snmpget

[Alberto Santos]

Hey everyone,

I'm facing difficult times with srx5800 and snmpget.
I have a cluster which reports it is running over 100% CPU for it's RE0,
but it is not.

Have someone ever seen this before?

Routing Engine status:
  Slot 0:
    Current state                  Master
    Election priority              Master (default)
    Temperature                 33 degrees C / 91 degrees F
    CPU temperature             29 degrees C / 84 degrees F
    DRAM                      2048 MB
    Memory utilization          20 percent
    CPU utilization:
      User                       0 percent
      Background                 0 percent
      Kernel                     3 percent
      Interrupt                  0 percent
      Idle                      97 percent
    Model                          RE-S-1300
    Serial ID                      9009074896
    Start time                     2012-05-10 18:01:28 BRT
    Uptime                         124 days, 6 hours, 35 minutes, 35 seconds
    Last reboot reason             Router rebooted after a normal shutdown.
    Load averages:                 1 minute   5 minute  15 minute
                                       0.10       0.04       0.01
JUNOS Software Release [11.2R6.3]

jnxOperatingCPU.9.1.0.0 = 100
jnxOperatingCPU.9.3.0.0 = 100

-- 
*BR/Alberto*