[j-nsp] Confusion about DSCP marking and rewrite rules

[ashish verma]

Ingress ipv6 marking is supported on MX. You need to use 'then traffic
class'.
On Apr 1, 2013 2:25 AM, "Mark Tinka" <mark.tinka at seacom.mu> wrote:

> On Monday, January 14, 2013 10:55:11 AM Per Granath wrote:
>
> > On egress you may apply a rewrite rule to a class (on an
> > interface). Essentially, this means you cannot rewrite
> > on ingress.
>
> On IQ2 and IQ2E PIC's, you can remark on ingress with the
> ToS Translation Tables feature.
>
> On the MX running Trio line cards, you can remark on ingress
> with an ingress firewall filter, but sadly, this doesn't
> support EXP or IPv6 DSCP bits.
>
> I like the ToS Translation Tables, but it's limited to
> platforms that run those line cards (which is not to say
> that an IQ2 or IQ2E PIC in an MX-FPC will work - never
> tried).
>
> Mark.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>