[j-nsp] M10i

[Ahmad Alhady]

But does MX80 support SDH ?


On Wed, Apr 10, 2013 at 11:30 AM, Michel de Nostredame
<d.nostra at gmail.com>wrote:

> Ah~ M20 does not support 10GE interface, also M20 is already EOL.
> MX could be good choice, see
>
> http://www.juniper.net/us/en/local/pdf/datasheets/1000378-en.pdf
> for MX80 cards, and
>
> http://www.juniper.net/us/en/products-services/routing/mx-series/
> for all MX series.
>
> --
> Michel~
>
> On Tue, Apr 9, 2013 at 7:07 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> > I think you'll need at least an M20 for your 10 GigE requirement as well
> as
> > SDH.
> >
> > If you can somehow get a different transit circuit than your SDH one, an
> > MX5 would be a much closer (throughput-wise) and better
> bang-for-your-buck
> > replacement for a 7206 than an M-series.
> > J-series with a T1 module could also work, depending on your "STM-1".
> >
> > If you need SDH though, you'll need M or T. J can do T1s.
> >
> > --j
> >
> > On Tue, Apr 9, 2013 at 6:28 PM, Orlando Cordova Gonzales <
> > orlando.cordova.gonzales at gmail.com> wrote:
> >
> >> hello,
> >>
> >> I need to change a CISCO 7206 router that computer I recommend one of
> the
> >> requirements is that you have two 10G interfacez two interfacez 1G and
> STM1
> >> interface to connect with the ISP was thinking M10i Router but I do not
> >> support 10g interface.
> >>
> >> thank you very much for your help.
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>