per.granath at gcc.com.cy
Wed Apr 10 07:31:08 EDT 2013
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Ahmad Alhady
Sent: Wednesday, April 10, 2013 12:38 PM
To: Michel de Nostredame
Subject: Re: [j-nsp] M10i
But does MX80 support SDH ?
On Wed, Apr 10, 2013 at 11:30 AM, Michel de Nostredame
<d.nostra at gmail.com>wrote:
> Ah~ M20 does not support 10GE interface, also M20 is already EOL.
> MX could be good choice, see
> for MX80 cards, and
> for all MX series.
> On Tue, Apr 9, 2013 at 7:07 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> > I think you'll need at least an M20 for your 10 GigE requirement as
> > well
> > SDH.
> > If you can somehow get a different transit circuit than your SDH
> > one, an
> > MX5 would be a much closer (throughput-wise) and better
> > replacement for a 7206 than an M-series.
> > J-series with a T1 module could also work, depending on your "STM-1".
> > If you need SDH though, you'll need M or T. J can do T1s.
> > --j
> > On Tue, Apr 9, 2013 at 6:28 PM, Orlando Cordova Gonzales <
> > orlando.cordova.gonzales at gmail.com> wrote:
> >> hello,
> >> I need to change a CISCO 7206 router that computer I recommend one
> >> of
> >> requirements is that you have two 10G interfacez two interfacez 1G
> >> and
> >> interface to connect with the ISP was thinking M10i Router but I do
> >> not support 10g interface.
> >> thank you very much for your help.
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> juniper-nsp mailing list juniper-nsp at puck.nether.net
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp