[j-nsp] SNMP on logical-system fxp0

[OBrien, Will]

Agreed. That's the way to do it.

On Apr 19, 2013, at 5:37 PM, Brandon Ross <bross at pobox.com>
 wrote:

> On Fri, 19 Apr 2013, Chip Marshall wrote:
> 
>> So, I have an MX5 with it's fxp0 management interface connect to
>> one network, which I've placed in a logical-system so it can have
>> it's own default route for out-of-band management.
> 
> [snip]
> 
>> The problem is the replies to SNMP queries are being routed out
>> using the main system's routing table, not the routing table of
>> the logical-system. I have confirmed this with packet captures.
> 
> Use the default logical-system for management and put your production stuff in a new logical-system.
> 
> -- 
> Brandon Ross                                      Yahoo & AIM:  BrandonNRoss
> +1-404-635-6667                                                ICQ:  2269442
> Schedule a meeting:  https://doodle.com/bross            Skype:  brandonross
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp