[j-nsp] SNMP on logical-system fxp0
nicholas.oas at gmail.com
Sat Apr 20 08:31:48 EDT 2013
Hmm. Or set a route to the mgt net in the default table whose next hop is
the mgt table? I've had to do this on high end sex to get traffic loss to
go out the data plane.
On Apr 19, 2013 7:32 PM, "OBrien, Will" <ObrienH at missouri.edu> wrote:
> Agreed. That's the way to do it.
> On Apr 19, 2013, at 5:37 PM, Brandon Ross <bross at pobox.com>
> > On Fri, 19 Apr 2013, Chip Marshall wrote:
> >> So, I have an MX5 with it's fxp0 management interface connect to
> >> one network, which I've placed in a logical-system so it can have
> >> it's own default route for out-of-band management.
> > [snip]
> >> The problem is the replies to SNMP queries are being routed out
> >> using the main system's routing table, not the routing table of
> >> the logical-system. I have confirmed this with packet captures.
> > Use the default logical-system for management and put your production
> stuff in a new logical-system.
> > --
> > Brandon Ross Yahoo & AIM:
> > +1-404-635-6667 ICQ:
> > Schedule a meeting: https://doodle.com/bross Skype:
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp