[j-nsp] SNMP on logical-system fxp0

[Nicholas Oas]

Sigh. High end SRX.
On Apr 20, 2013 8:31 AM, "Nicholas Oas" <nicholas.oas at gmail.com> wrote:

> Hmm. Or set a route to the mgt net in the default table whose next hop is
> the mgt table? I've had to do this on high end sex to get traffic loss to
> go out the data plane.
> On Apr 19, 2013 7:32 PM, "OBrien, Will" <ObrienH at missouri.edu> wrote:
>
>> Agreed. That's the way to do it.
>>
>> On Apr 19, 2013, at 5:37 PM, Brandon Ross <bross at pobox.com>
>>  wrote:
>>
>> > On Fri, 19 Apr 2013, Chip Marshall wrote:
>> >
>> >> So, I have an MX5 with it's fxp0 management interface connect to
>> >> one network, which I've placed in a logical-system so it can have
>> >> it's own default route for out-of-band management.
>> >
>> > [snip]
>> >
>> >> The problem is the replies to SNMP queries are being routed out
>> >> using the main system's routing table, not the routing table of
>> >> the logical-system. I have confirmed this with packet captures.
>> >
>> > Use the default logical-system for management and put your production
>> stuff in a new logical-system.
>> >
>> > --
>> > Brandon Ross                                      Yahoo & AIM:
>>  BrandonNRoss
>> > +1-404-635-6667                                                ICQ:
>>  2269442
>> > Schedule a meeting:  https://doodle.com/bross            Skype:
>>  brandonross
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>