[j-nsp] Mx5 traffic generator

[Diogo Montagner]

Hi Rodrigo,

some suggestions can be found here:

http://www.juniper.net/us/en/community/junos/training-certification/day-one/networking-technologies-series/a-packet-walkthrough/

HTH

./diogo -montagner
JNCIE-SP 0x41A


On Mon, Aug 19, 2013 at 6:31 AM, Rodrigo Augusto <rodrigo at 1telecom.com.br>wrote:

> Hi folks!
> Does anyone knows if can i generate traffic from mx to mx?! Like iperf or
> ostinato...
>
>
> Enviado via iPhone
> Grupo Connectoway
>
> Em 18/08/2013, às 16:56, Giuliano Medalha <giuliano at wztech.com.br>
> escreveu:
>
> > People,
> >
> > Someone on the list have implemented virtual chassis using EX8208 before
> ?
> >
> > We are looking for some sample of configuration related to a firewall
> > filter (Ex. PROTECT-RE) for EX8208 in a Virtual Chassis Environment ?
> >
> > Is it possible to use the same loopback address ?  It will protect the
> > external XRE200 at the same way ?  Is it correct ?
> >
> > I am looking for some reference inside JUNIPER web site without sucess.
> >
> > The VCP ports must be configured with any kind of filter ?
> >
> > The input policer is not permited in loopback 0 ... how is possible to
> > policer ICMP packets for example ?
> >
> > Does anyone on list has some experience with that ?
> >
> > Thanks a lot,
> >
> > Giuliano
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp