[j-nsp] Anybody use dual RE in srx3k? SCM only?

[Santiago Martinez]

Hi, the SCM will only allow you to use a secondary control link on the srx3600. Juniper sales ing said that they are not planning to add support for a second RE on the srx3000 family. if you don't have the SCM the second control port will be/stay disable.
Hope it helps
Santiago.

> On 16 Dec 2013, at 21:26, "OBrien, Will" <ObrienH at missouri.edu> wrote:
> 
> Second REs don't really do anything on SRX... yet.
> 
> On the 5800s, I had to add them in order to bring up a secondary control link. The only thing they do is init the control plane on the chassis for that link to come up.
> I believe it's an artifact from stealing the MX chassis.  I don't think it does anything for you on the 3600, since that's a different chassis architecture altogether.
> 
> Will
> 
> 
>> On Dec 16, 2013, at 3:07 PM, Morgan McLean wrote:
>> 
>> Hi all,
>> 
>> Looking into installing the SCM module into a couple of SRX3600's I have in
>> production. Notice the diagram from juniper says slot RE1 for SCM. Do they
>> support running another RE? Just curious if anybody does this, if its worth
>> it or if its even possible.
>> 
>> -- 
>> Thanks,
>> Morgan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp