[j-nsp] equivalent of "show dsl interface"

[Ben Dale]

show interfaces at-1/0/0 extensive | match "Bit" 

First column is your downstream sync, third column is your upstream.


On 27/02/2013, at 2:52 PM, Ali Sumsam <ali+junipernsp at eintellego.net> wrote:

> Hi,
> Does anyone know the equivalent of Cisco commands "show dsl interface" in
> Junos.
> I want to see the speed of DSL.
> 
> Regards,
> *Ali Sumsam CCIE*
> *Network Engineer - Level 3*
> eintellego Pty Ltd
> ali at eintellego.net ; www.eintellego.net
> 
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> 
> Cell +61 (0)410 603 531
> 
> facebook.com/eintellego
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
> 
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>