[j-nsp] equivalent of "show dsl interface"

[Graham Brown]

Hi Ali,

You should be able to use the 'show interfaces <interface-name> extensive
command. Full DSL statistics are included in this output.

http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/jd0e20123.html

HTH,
Graham

On Wednesday, February 27, 2013, Ali Sumsam wrote:

> Hi,
> Does anyone know the equivalent of Cisco commands "show dsl interface" in
> Junos.
> I want to see the speed of DSL.
>
> Regards,
> *Ali Sumsam CCIE*
> *Network Engineer - Level 3*
> eintellego Pty Ltd
> ali at eintellego.net <javascript:;> ; www.eintellego.net
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)410 603 531
>
> facebook.com/eintellego
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Graham Brown
Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer>
LinkedIn <http://www.linkedin.com/in/grahamcbrown>