[j-nsp] Using a Juniper router as an IPv6 SLAAC client

[Huan Pham]

Hi all,

I would like to do a simple test to make sure that SLAAC configuration on
R1 is working as expected. However, I do not want to use a real PC
connected to it to test, but I want to use another router (R2) as client.
Could you please let me know if it is possible, and how it is done in
Junos. Thanks.

Below is what I try to achieve if it is done in Cisco world.

R2(config-if)#interface gig/0
R2(config-if)#ipv6 address autoconfig
R2(config-if)#

Thanks in advance.

Cheers,