[j-nsp] Junos spanning-tree patch cost method

Misha Gzirishvili misha.gzirishvili at gmail.com
Tue Jan 15 07:46:20 EST 2013


Hi there,
Not sure about changing path cost method on juniper, but if you are
connecting with cisco switches, you can use "spanning-tree pathcost method
long" on Cisco. So, cost calculations on cisco and juniper will be
identical.

On Fri, Jan 11, 2013 at 12:09 PM, Michael Radits <
michael.radits at nextlayer.at> wrote:

> Hi there!
>
> Is it possible on juniper ex4200 switches to change the stp path cost
> method from 32bit (long) to 16bit (short)?
>
> xxx at xxx# run show spanning-tree bridge detail | match method
>     Path cost method                : 32 bit
>
> Thanks in advance for your answer
>
> Regards, Mike
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list