[j-nsp] EX-RPS configuration

[Morgan McLean]

This is true, because I run 3300's and ran into this very problem.

Morgan


On Thu, Jul 4, 2013 at 10:36 AM, Nick Kritsky <nick.kritsky at gmail.com>wrote:

> Thanks for all who replied on- and off-list.
> Looks like the obvious step I was missing is - "EX3300 switches have to run
> 12.1 or above to work with EX-RPS". I will try to confirm this tomorrow.
>
> nick
>
>
> On Thu, Jul 4, 2013 at 6:04 PM, Nick Kritsky <nick.kritsky at gmail.com>
> wrote:
>
> > Hello all,
> >
> > Is anyone here who has experience with EX-RPS - redundant power supply
> for
> > EX switches?
> > I'd like to ask some questions/directions .
> >
> > From what I see - basically they are just DC converters with some minimal
> > set of knobs.
> > Documentation is virtually non-existent. Main idea I got from the site -
> > it should just work when you plug it in. But guess what -  it doesn't. It
> > looks like I have missed some very simple step. The one that was
> considered
> > obvious to the guy who was creating the manual :)
> >
> > thanks
> > nick
> >
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Thanks,
Morgan