[j-nsp] Dynamic VPN from MAC

[OBrien, Will]

ipsecuritas is a nice mac client. Free too. I used it all the time with ssgs, but haven't gotten around to making a SRX config.
It allows for split routing too.

On Jul 14, 2013, at 11:39 PM, Doug McIntyre <merlyn at geeks.org>
 wrote:

> On Mon, Jul 15, 2013 at 12:59:18PM +1000, Ali Sumsam wrote:
>> Is it possible to connect Dynamic VPN to Juniper SRX100 from my MAC?
>> Can I dial directly from my Mac's dialer, if I dont want to use Junose
>> Pulse.
> 
> The Mac "dialer" is L2TP over IPSec, so the SRX would need to support
> that set of standards if you wanted to do that. But the SRX doesn't
> support L2TP over IPSec at all AFAIK. 
> 
> If you don't want to use Junos Pulse, I'd recommend buying 
> VPN Tracker for the Mac. Excellent IPSec VPN client. Works no-matter-what
> for just about any IPSec VPN setup. Easy to setup, easy to use. 
> But, it costs $$$. 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp