[j-nsp] Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850

[Eric Van Tol]

> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of Abdullah Al Faruque Mullick
> Sent: Friday, June 14, 2013 10:56 AM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Getting High Latency and Slow browsing Issue in
> Juniper M7i with RE-850
> 
> Hi
> 
> 
> Can anyone help me to sort out the issue or could tell me how to proceeds
> or how much traffic can m7i handle????
> 
> 
> Please help me as I not getting anything wrong in M7i but in peak we are
> getting high latency and slow browsing issue....
> 
> Thanks in advanced...

While it's somewhat difficult to work out how much bandwidth each port is forwarding, due to the message formatting, you should be aware that the 4-port IQ2 PIC is oversubscribed 4:1.  You can only get a total of 1Gb/s full-duplex through that PIC, so if one is receiving 450Mb/s, another is receiving 350Mb/s and another is receiving 450Mb/s, you are way oversubscribed on that PIC.

-evt