[j-nsp] Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850

Fri Jun 14 11:33:36 EDT 2013

Hi,

Thanks a ton for your reply.

So we have two PIC (1x G/E   and   4x 1GE) and it means we can have 2 gigs traffic max but 1 gig (MAX) combined in one PIC.

Would like to request you to let me know how could we trace that any traffic is getting drop and or do I need to run any other troubleshooting?

Thanks in advanced.

Thanks & Regards,

Abdullah Mullick
Sr. Engineer - CNOC
Indian Cable Net Company Limited
J-1/12, Block - EP, 4th Floor, Sector - V, Kol-91
(91) 33 4002 5108 | Cell (91) 90511 33372

From: Gaurav Taparia [mailto:gaurav.taparia at gmail.com]
Sent: Friday, June 14, 2013 8:42 PM
To: Abdullah Al Faruque Mullick
Subject: Re: [j-nsp] Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850

Hi,
The combined back plane of the 4x1ge pic is 1gbps and you seem to be exceeding it.

- GT
On Jun 14, 2013 8:31 PM, "Abdullah Al Faruque Mullick" <Abdullah.Mullick at siticable.com<mailto:Abdullah.Mullick at siticable.com>> wrote:
Hi

Can anyone help me to sort out the issue or could tell me how to proceeds or how much traffic can m7i handle????

Please help me as I not getting anything wrong in M7i but in peak we are getting high latency and slow browsing issue....

Thanks in advanced...

Thanks & Regards,

Abdullah Mullick
Sr. Engineer - CNOC
Indian Cable Net Company Limited
J-1/12, Block - EP, 4th Floor, Sector - V, Kol-91
(91) 33 4002 5108 | Cell (91) 90511 33372

From: Abdullah Al Faruque Mullick
Sent: Wednesday, June 12, 2013 3:39 PM
To: juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
Subject: Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850

Dear All

We have one juniper M7i with RE-850 routing engine and with one 1x G/E, 4x 1GE(LAN), IQ2E PIC with Enhanced CFEB.

Version:               11.2R3.3

For last few weeks we are observing high latency and as result slow browsing issue for the same.

Interface details:              ge-0/0/0              link-to-ISP1         avg. input BW 135Mbps

                                                ge-0/0/1              link-to-switch(aggregated port - 1)          avg. input BW 450 Mbps and avg. out BW 150 Mbps

                                                ge-0/0/2              link-to-ISP2         avg. input BW 250 Mbps

                                                ge-0/0/3              link-to-switch(aggregated port - 2)          avg. input BW 450 Mbps and avg. out BW 150 Mbps

                                                ge-1/3/0              link-to-ISP3         avg. input BW 550 Mbps and avg. out BW 300 Mbps

as checked router load average is also OK.

Load averages:                 1 minute   5 minute  15 minute
                                       0.00       0.06       0.05

What could be the issue? Please help us to sort out the issue...

Thanks in advanced.

Thanks & Regards,

Abdullah Mullick

________________________________
This communication contains confidential or legally privileged information. The material, data, information, theme, ideas, stories, concepts, abstracts, notes, etc. (Proprietary Information) contained in this communication is the sole and exclusive property of Siticable Network Limited and form part of this communication solely for the discussion with the addressee. The Proprietary information contained in this communication may be used only in the manner and for the purposes as may be expressly permitted by Siticable Network Limited. If you are not the intended recipient and have received this Proprietary Information in error, please notify us immediately by responding to this by post/email and delete it from your records. Any use, utilization dissemination, distribution or copying of this Proprietary Information without proper authorization by us is strictly prohibited. Damages merely shall not be a sufficient remedy for violation of the aforesaid and we are entitled to th!
 e remedies by way of injunction, specific performance and other equitable relief for any breach of the above in addition to any other remedies available to us at law or in equity(c) 2008. Siticable employs every reasonable precaution to minimize risk arising from virus and malware, and ensure virus-free communication. However we cannot accept liability for any damage which may arise as a result of software viruses. Recipients are strongly advised to employ powerful and updated virus checks at their end. All rights reserved with Siticable Network Limited.

www.siticable.com<http://www.siticable.com>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp

________________________________
This communication contains confidential or legally privileged information. The material, data, information, theme, ideas, stories, concepts, abstracts, notes, etc. (Proprietary Information) contained in this communication is the sole and exclusive property of Siticable Network Limited and form part of this communication solely for the discussion with the addressee. The Proprietary information contained in this communication may be used only in the manner and for the purposes as may be expressly permitted by Siticable Network Limited. If you are not the intended recipient and have received this Proprietary Information in error, please notify us immediately by responding to this by post/email and delete it from your records. Any use, utilization dissemination, distribution or copying of this Proprietary Information without proper authorization by us is strictly prohibited. Damages merely shall not be a sufficient remedy for violation of the aforesaid and we are entitled to the remedies by way of injunction, specific performance and other equitable relief for any breach of the above in addition to any other remedies available to us at law or in equity(c) 2008. Siticable employs every reasonable precaution to minimize risk arising from virus and malware, and ensure virus-free communication. However we cannot accept liability for any damage which may arise as a result of software viruses. Recipients are strongly advised to employ powerful and updated virus checks at their end. All rights reserved with Siticable Network Limited.

www.siticable.com