[j-nsp] single ip on two interfaces

[Morgan McLean]

I think Mark is referring to bonding under linux...right? Typically bonding
has an active / passive pair, and it can also round robin sending the
packets out individual interfaces. Obviously all returning traffic will be
destined to one mac, which is the active slave at the time.

Bonding also supports LACP though.

Morgan


On Tue, Mar 5, 2013 at 2:44 PM, Dale Shaw <dale.shaw+j-nsp at gmail.com> wrote:

> Hi Mark,
>
> On Wed, Mar 6, 2013 at 8:09 AM, Mark Jones <mjones at mnsi.net> wrote:
> > Is it possible to have the same ip accessible via two interfaces the same
> > way you would on a server.  This is on an mx series router.
>
> What do you mean when you say "..the same way you would on a server" ?
>
> Assigning the same IP address to separate interfaces (logical or
> physical) is usually "wrong", unless each interface is in a separate
> routing instance/VRF.
>
> Can you describe your scenario?
>
> Cheers,
> Dale
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Thanks,
Morgan