[j-nsp] VLAN bundles in CCC

[Eric Van Tol]

> -----Original Message-----
> From: Alex Arseniev [mailto:alex.arseniev at gmail.com]
> Sent: Wednesday, March 13, 2013 11:05 AM
> To: Eric Van Tol; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] VLAN bundles in CCC
> 
> 2 things:
> 1/ add "family ccc" under ge-1/2/0.2
> 2/ add "encapsulation ethernet" under l2circuit neighbor config.
> Default encaps when You use tagged units is "ethernet-vlan" and with
> "ethernet-vlan" the L2circuit actually checks if VLAN ids are same on
> both
> ends. With "encapsulation ethernet" this check is not done.
> HTH
> Thanks
> Alex

Thanks, Alex, but that didn't do it.  I still see the l2circuit as 'up', but still no traffic between the two:

Neighbor: 10.0.0.2 
    Interface                 Type  St     Time last up          # Up trans
    ge-1/2/0.2(vc 2)          rmt   Up     Mar 12 19:40:05 2013           1
      Remote PE: 10.0.0.2, Negotiated control-word: No
      Incoming label: 299792, Outgoing label: 299792
      Negotiated PW status TLV: No
      Local interface: ge-1/2/0.2, Status: Up, Encapsulation: ETHERNET

-evt