[j-nsp] Help needed with IPSEC VPN on J-Series
Bjørn Tore
bt at paulen.net
Wed Mar 20 11:28:08 EDT 2013
Are the st-interfaces UP? What does show security ipsec security-associations say? (Am offline; spellcheck needed...)
Bjørn Tore @ mobil
Den 20. mars 2013 kl. 15:46 skrev Bill Sandiford <bill at telnetcommunications.com>:
> Hi All,
>
> I need some help with an IPSEC tunnel that I just can't seem to get working on a J-6350. I have been able to get the tunnels to come up, but can't seem to pass traffic over the tunnels
>
> I've done the usual things. I've created an st0.0 interface and bound it to the tunnel using the bind-interface command. I've created a static route and pointed it at the st0.0 interface. I just can't seem to get traffic to pass over the tunnel.
>
> Any help or suggestions would be appreciated. I'm also willing to put a $$$ bounty on this for anyone that is willing to help me get it working via teamviewer.
>
> Regards,
> Bill
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list