[j-nsp] L3 Incompletes

Tue May 21 07:45:18 EDT 2013

If the L3 incomplete errors are increasing on the interface that is facing
Cisco, check out this article:
http://kb.juniper.net/InfoCenter/index?page=content&id=KB12386&actp=RSS

Nick

On Tue, May 21, 2013 at 11:30 AM, Mohammad Khalil <eng.mssk at gmail.com>wrote:

> Hi , I have mx480 connected to My ASN Gateway
> The LAN side which is conncted to the access network is configured with
> 1600 and has no errors
> The WAN interface is also configured with MTU 1600 but the L3 incomplete
> are increasing , what could be the issue ?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>