[j-nsp] EX2200 OSPF question

[Paul Stewart]

You have to buy the extended feature license on the EX2200 to run OSPF.
We have a bunch of EX2200-C deployed that have OSPF routes on them and
they work fine - to qualify that though, there is very little traffic
through them at layer3 - cant' see them handling much layer3 traffic.
That deployment is mainly layer2 oriented.

Also, on certain releases OSPFv3 would function and work fairly well only
to upgrade and then the feature stopped working. When I asked Juniper they
told me that OSPFv3 wasn't supported at all at which point I asked them
why we were able to run it for about a year on some older software
releases with no problems - answer I got was that the code was included by
mistake Š geeshŠ.

Paul


On 2013-05-22 5:10 PM, "joe mcguckin" <joe at via.net> wrote:

>
>My understanding is that the EX2200 can run OSPF on 4 interfaces with the
>standard software license - right?
>
>How well does the OSPF work? Just from goofing around on the console, the
>response of the switch seems a little slow - like the cpu
>is a bit underpowered...
>
>Thanks,
>
>Joe
>
>Joe McGuckin
>ViaNet Communications
>
>joe at via.net
>650-207-0372 cell
>650-213-1302 office
>650-969-2124 fax
>
>
>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp