[j-nsp] ex4500 snmp temperature zero

[huy phuong]

You  see zero because it is NOT supported on EX4500 platform.

regards,

Phuong



On Tue, Nov 12, 2013 at 6:09 AM, ryanL <ryan.landry at gmail.com> wrote:

> heya list, anyone know if this is a bug? i've tried restarting snmp
> and shm-rtsdbd but no success.
>
> i can't access juniper.net at the moment to research. "service
> unavailable"
>
> Hostname: fs-cs2
> Model: ex4500-40f
> JUNOS Base OS boot [12.3R2.5]
> JUNOS Base OS Software Suite [12.3R2.5]
> JUNOS Kernel Software Suite [12.3R2.5]
> JUNOS Crypto Software Suite [12.3R2.5]
> JUNOS Online Documentation [12.3R2.5]
> JUNOS Enterprise Software Suite [12.3R2.5]
> JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R2.5]
> JUNOS Routing Software Suite [12.3R2.5]
> JUNOS Web Management [12.3R2.5]
> JUNOS FIPS mode utilities [12.3R2.5]
>
> # snmpwalk -v 2c -c <blah> fs-cs2 JUNIPER-MIB::jnxOperatingTemp
> JUNIPER-MIB::jnxOperatingTemp.1.1.0.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.2.1.1.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.2.1.2.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.4.1.1.1 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.4.1.1.2 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.4.1.1.3 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.4.1.1.4 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.4.1.1.5 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.7.1.0.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.8.1.1.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.8.1.4.0 = Gauge32: 0
> JUNIPER-MIB::jnxOperatingTemp.9.1.0.0 = Gauge32: 0
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>