[j-nsp] Juniper MX104

Wed Nov 13 00:33:52 EST 2013

Isn't that using the front MIC slot though?

The rear 'Services Slot' is an MPC slot isn't it?

Based on the following:

MS-MIC 16G - MS-MIC with 16 GB of memory provides 9GB of service
throughput, occupies single MIC slot on MX5, MX10, MX40, and MX80 3D
Universal Edge Routers, as well as on the MPC1, MPC2, and MPC3 cards for
the MX2020, MX2010, MX960, MX480,
and MX240 3D Universal Edge Router.

MS-MPC-128 - MS-MPC with 128 GB of memory (32 GB per NPU), provides 60Gbps
of service throughput, occupies a single slot in MX2020, MX2010, MX960,
MX480, and MX240 3D Universal Edge Routers

The rear picture of the MX80 at
http://www.juniper.net/shared/img/products/mx-series/mx80/mx80-rear-high.jpg

Says "MPC 0" and "MIC 1" in smaller writing under it.

>From front right slot is also called "1/MIC 1"

I think we need further clarification.

...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/theispguy ; blog: www.theispguy.com

The Experts Who The Experts Call
Juniper - Cisco - Cloud

On Wed, Nov 13, 2013 at 4:04 PM, Ben Dale <bdale at comlinx.com.au> wrote:

> MS-MIC is out for the MX5-80:
>
> http://www.juniper.net/us/en/local/pdf/datasheets/1000454-en.pdf
>
> doesn't look like there isn't a services port on the back of the 104
> though:
>
>
> http://www.juniper.net/shared/img/products/mx-series/mx104/mx104-rear-high.jpg
>
> maybe you can use one of the front slots?
>
> On 13 Nov 2013, at 2:52 pm, Skeeve Stevens <
> skeeve+junipernsp at eintellegonetworks.com> wrote:
>
> > Does anyone know how many users the MX104 will be able to handle though?
> >
> > The 4000 user limit on the MX80 was quite low.
> >
> > Does the MX104 have the services port on the back like the MX80?  I'm
> waiting for the CGN Services card which was supposed to be released around
> now.
> >
> >
> > ...Skeeve
> >
> > Skeeve Stevens - eintellego Networks Pty Ltd
> > skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
> > Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
> > facebook.com/eintellegonetworks ; linkedin.com/in/skeeve
> > twitter.com/theispguy ; blog: www.theispguy.com
> >
> > The Experts Who The Experts Call
> > Juniper - Cisco - Cloud
> >
> >
> > On Wed, Nov 13, 2013 at 3:46 PM, Ben Dale <bdale at comlinx.com.au> wrote:
> > That and I think a lot of the BRAS "migration" functionality (LNS/LAC
> etc) was late to the party after being told it wasn't going to happen for
> anything lower than the 240.
> >
> > On 13 Nov 2013, at 12:51 pm, Bill Blackford <bblackford at gmail.com>
> wrote:
> >
> > > My personal feeling is the MX80 wasn't widely adopted as a lower
> density
> > > subscriber box given the lack of redundant REs. The MX104 may find it's
> > > niche as a BRAS.
> > >
> > >
> > >
> > >
> > > On Tue, Nov 12, 2013 at 5:25 PM, Eric Van Tol <eric at atlantech.net>
> wrote:
> > >
> > >> One thing to keep in mind about these boxes is that, like the
> > >> MX5/10/40/80, the built-in 10G ports do not do hierarchical QoS
> (per-unit
> > >> scheduling).  I'm confused as to why this is, considering they are
> > >> Trio-based routers, but I digress.  I personally don't think that the
> > >> astronomical cost to enable the 10G ports on all the low-end MX
> routers is
> > >> worth it, considering they can't even do per-unit scheduling.
> > >>
> > >> -evt
> > >>
> > >>> -----Original Message-----
> > >>> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On
> > >> Behalf Of
> > >>> joel jaeggli
> > >>> Sent: Tuesday, November 12, 2013 4:00 PM
> > >>> To: Saku Ytti
> > >>> Cc: juniper-nsp at puck.nether.net
> > >>> Subject: Re: [j-nsp] Juniper MX104
> > >>>
> > >>>
> > >>> On Nov 12, 2013, at 12:46 PM, Saku Ytti <saku at ytti.fi> wrote:
> > >>>
> > >>>> On (2013-11-12 20:14 +0000), Tom Storey wrote:
> > >>>>
> > >>>>> Why so much just to enable some ports? How do they come up with
> that
> > >>>>> kind of price? Pluck it out of thin air?
> > >>>>>
> > >>>>> The hardware has been paid for, and I know thats only list pricing,
> > >>>>> but it still seems ridiculous.
> > >>>>
> > >>>> The question might have been rhetoric. But I'll bite.
> > >>>>
> > >>>> The BOM on these boxes is nothing, I'm guessing less than 1kUSD. But
> > >> the
> > >>>> volume you can sell them also is very very small, so the margins
> need
> > >> to
> > >>> be
> > >>>> very high to be able to design and support them.
> > >>>> Licensing allows you to sell to larger group of people, people who
> > >>> normally
> > >>>> would buy smaller/inferior box, now can afford it,  which in turn
> > >> allows
> > >>> you
> > >>>> to reduce your margins, making you more competitive.
> > >>>>
> > >>>> I actually like it. I wish vendors like Agilent/Ixia, Spirent would
> > >> sell
> > >>>> test-kit with some sort of 'per hours used' license. Lot of SPs have
> > >> need
> > >>> for
> > >>>> proper testing kit, but only will need them very irregularly. And
> > >> renting
> > >>> is
> > >>>> always such a chore. It's same thing there, BOM is nothing, but
> volume
> > >> is
> > >>> even
> > >>>> lower, so prices are ridiculously high, consequently proper testing
> is
> > >>> very
> > >>>> rarely done by other than telco size SPs.
> > >>>
> > >>> It's one of those things where you work with account team. if the
> > >> commercial
> > >>> terms don't work out for most potential buyers, then the product
> won't be
> > >>> successful and either things will change or they won't.
> > >>>
> > >>>> --
> > >>>> ++ytti
> > >>>> _______________________________________________
> > >>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> > >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >>>>
> > >>
> > >>
> > >> _______________________________________________
> > >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> > >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >>
> > >
> > >
> > >
> > > --
> > > Bill Blackford
> > >
> > > Logged into reality and abusing my sudo privileges.....
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>