[j-nsp] RIB -> FIB filtering.

[Kevin Hodle]

What about bgp monitoring protocol !?  Hey, Cisco (and brocade) if you are
screening - some ajax/xml based framework with hooks into MIB data is no
substitute for this, I would like semi real time path flux from each
neighbors inbound rib per afi, in addition to best-path  ...

Sorry for coming from left field - also you can acheive this same fib
policy with a table-map on other vendors :)

Regards,
Kevin
On Nov 10, 2013 11:34 PM, "Darius Jahandarie" <djahandarie at gmail.com> wrote:

> On Sun, Nov 10, 2013 at 3:23 AM, Matjaz Straus Istenic
> <matjaz at njetwork.si> wrote:
> > Fat fingers, sorry:
> >
> > On 10. nov. 2013, at 09:07, Matjaz Straus Istenic <matjaz at njetwork.si>
> wrote:
> >
> >> If your upstream is using juniper gear, it would (technically speaking,
> of course) very hard for them to implement such a service.
> > ...it would _not_ be very hard...
>
> Amusingly, your first email is probably more accurate. The flowspec
> code in JunOS is bitrotted and performs extremely poorly.
>
> --
> Darius Jahandarie
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>