[j-nsp] RIB -> FIB filtering.

[Adam Vitkovsky]

Though you'd still have to use table-map in order avoid installing these
valid prefixes into RIB.

So either with Juniper or with Cisco you'd have to filter installation of
these prefixes from BGP table into RIB on all routers meant to advertise
these prefixes further and not black-hole themselves. 

adam
-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
Dobbins, Roland
Sent: Wednesday, November 13, 2013 12:52 PM
To: Juniper list
Subject: Re: [j-nsp] RIB -> FIB filtering.


On Nov 12, 2013, at 5:04 PM, Peter Krupl <paak at siminn.dk> wrote:

> Thank you all for your input.

I'm not a Juniper expert, but this is pretty straightforward to accomplish
on Cisco boxes using community-based filtering . . .

-----------------------------------------------------------------------
Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>

	  Luck is the residue of opportunity and design.

		       -- John Milton


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp