[j-nsp] l2circuit to bridge domain

[Alex Arseniev]

routing instance-type virtual-switch (VS) + bridge-domain (BD) inside 
that VS.
One limitation is that You cannot do VLAN manipulation in the middle 
between l2circuit and BD whereas You can on a physical cable loop.
HTH
Thanks
Alex

On 14/10/2013 19:31, Michail Litvak wrote:
> Hello,
>
> I have l2-pseudowire  with tagged ethernet port on other side
> (encapsulation ethernet)
> And I receive this l2circuit on Juniper MX and want to unpack trunk to
> separate vlan's
> (connect to a few bridge domains).
> Are there any ideas except "hairpin" between two ports with l2circuit on
> one and subinterfaces
> on another ?
>