[j-nsp] EX2200 rate limiting per port ?

[Mark Tinka]

On Thursday, October 17, 2013 11:23:12 AM Alexandre Snarskii 
wrote:

> Actually, EX-series supports egress shaping, which may be
> sufficient in this case (iirc, shapers applied
> port-wide, there are no way to "shape this vlan and do
> not shape (or shape differently) another one").

There are cases where one may prefer shapers to policers, 
and vice versa. Egress policing has always been a challenge 
for low-end switches. Shaping has been around, albeit with 
some limitations.

> On the other hand, shapers and policers should be applied
> not on the edge switches but rather on customer-facing
> routers...

In many situations, the customer-facing port is on a (low-
end) switch, including cases where IP or MPLS services are 
being offered to the customer from the switch itself.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20131017/a9c64dbd/attachment.sig>