[j-nsp] ng-mvpn problem

[Mihai Gabriel]

Hello,

 I have a basic setup with 2 PE's (X and Z) , one multicast source attached
to X and one receiver attached to Z.
I configured a NG-MVPN with rsvp-te between  PE's but X doesn't send SA
autodiscovery to Z so the traffic is dropped.

x> show configuration routing-instances
mvpn {
    instance-type vrf;
    interface lt-1/1/10.770;
    interface lo0.777;
    route-distinguisher 1:1;
    provider-tunnel {
        rsvp-te {
            label-switched-path-template {
                default-template;
            }
        }
    }
    vrf-target target:1:1;
    vrf-table-label;
    protocols {
        pim {
            rp {
                local {
                    address 20.20.20.111;
                }
            }
            interface all;
        }
        mvpn;
    }
}


z> show configuration routing-instances
mvpn {
    instance-type vrf;
    interface lt-1/1/10.772;
    route-distinguisher 1:2;
    provider-tunnel {
        rsvp-te {
            label-switched-path-template {
                default-template;
            }
        }
    }
    vrf-target target:1:1;
    vrf-table-label;
    protocols {
        pim {
            interface all;
        }
        mvpn;
    }
}


x> show multicast route instance mvpn extensive
Instance: mvpn Family: INET

Group: 239.1.1.1
    Source: 10.100.1.2/32
    Upstream interface: lt-1/1/10.770
    Session description: Organisational Local Scope
    Statistics: 10 kBps, 10 pps, 1291 packets
    Next-hop ID: 0
    Upstream protocol: PIM
    Route state: Active
    Forwarding state: Pruned
    Cache lifetime/timeout: 360 seconds
    Wrong incoming interface notifications: 0
    Uptime: 00:10:37

Instance: mvpn Family: INET6

x> show route receive-protocol bgp 20.20.20.2 table mvpn.mvpn.0

mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
  Prefix  Nexthop       MED     Lclpref    AS path
  1:1:2:20.20.20.2/240
*                         20.20.20.2                   100        I

z> show route receive-protocol bgp 20.20.20.1 table mvpn.mvpn.0

mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
  Prefix  Nexthop       MED     Lclpref    AS path
  1:1:1:20.20.20.1/240
*                         20.20.20.1                   100        I

x> show mpls lsp p2mp
Ingress LSP: 1 sessions
P2MP name: 1:1:mvpn:mvpn, P2MP branch count: 1
To              From            State Rt P     ActivePath       LSPname
20.20.20.2      20.20.20.1      Up     0 *                      20.20.20.2:1
:1:mvpn:mvpn
Total 1 displayed, Up 1, Down 0

Egress LSP: 1 sessions
P2MP name: 1:2:mvpn:mvpn, P2MP branch count: 1
To              From            State   Rt Style Labelin Labelout LSPname
20.20.20.1      20.20.20.2      Up       0  1 SE      16        -
20.20.20.1:1:2:mvpn:mvpn
Total 1 displayed, Up 1, Down 0

Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0

Am i doing something wrong?

Thanks