[j-nsp] ng-mvpn problem

[Antonio Sanchez-Monge]

Hi Mihai,

Doesn't ring a bell at first sight. What's the configuration of interfaces
lo0.777 and lt-1/1/10.770 ?

Thanks,

Ato




On 10/22/13 6:56 PM, "Mihai Gabriel" <mihaigabriel at gmail.com> wrote:

>Hello,
>
> I have a basic setup with 2 PE's (X and Z) , one multicast source
>attached
>to X and one receiver attached to Z.
>I configured a NG-MVPN with rsvp-te between  PE's but X doesn't send SA
>autodiscovery to Z so the traffic is dropped.
>
>x> show configuration routing-instances
>mvpn {
>    instance-type vrf;
>    interface lt-1/1/10.770;
>    interface lo0.777;
>    route-distinguisher 1:1;
>    provider-tunnel {
>        rsvp-te {
>            label-switched-path-template {
>                default-template;
>            }
>        }
>    }
>    vrf-target target:1:1;
>    vrf-table-label;
>    protocols {
>        pim {
>            rp {
>                local {
>                    address 20.20.20.111;
>                }
>            }
>            interface all;
>        }
>        mvpn;
>    }
>}
>
>
>z> show configuration routing-instances
>mvpn {
>    instance-type vrf;
>    interface lt-1/1/10.772;
>    route-distinguisher 1:2;
>    provider-tunnel {
>        rsvp-te {
>            label-switched-path-template {
>                default-template;
>            }
>        }
>    }
>    vrf-target target:1:1;
>    vrf-table-label;
>    protocols {
>        pim {
>            interface all;
>        }
>        mvpn;
>    }
>}
>
>
>x> show multicast route instance mvpn extensive
>Instance: mvpn Family: INET
>
>Group: 239.1.1.1
>    Source: 10.100.1.2/32
>    Upstream interface: lt-1/1/10.770
>    Session description: Organisational Local Scope
>    Statistics: 10 kBps, 10 pps, 1291 packets
>    Next-hop ID: 0
>    Upstream protocol: PIM
>    Route state: Active
>    Forwarding state: Pruned
>    Cache lifetime/timeout: 360 seconds
>    Wrong incoming interface notifications: 0
>    Uptime: 00:10:37
>
>Instance: mvpn Family: INET6
>
>x> show route receive-protocol bgp 20.20.20.2 table mvpn.mvpn.0
>
>mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
>  Prefix  Nexthop       MED     Lclpref    AS path
>  1:1:2:20.20.20.2/240
>*                         20.20.20.2                   100        I
>
>z> show route receive-protocol bgp 20.20.20.1 table mvpn.mvpn.0
>
>mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
>  Prefix  Nexthop       MED     Lclpref    AS path
>  1:1:1:20.20.20.1/240
>*                         20.20.20.1                   100        I
>
>x> show mpls lsp p2mp
>Ingress LSP: 1 sessions
>P2MP name: 1:1:mvpn:mvpn, P2MP branch count: 1
>To              From            State Rt P     ActivePath       LSPname
>20.20.20.2      20.20.20.1      Up     0 *
>20.20.20.2:1
>:1:mvpn:mvpn
>Total 1 displayed, Up 1, Down 0
>
>Egress LSP: 1 sessions
>P2MP name: 1:2:mvpn:mvpn, P2MP branch count: 1
>To              From            State   Rt Style Labelin Labelout LSPname
>20.20.20.1      20.20.20.2      Up       0  1 SE      16        -
>20.20.20.1:1:2:mvpn:mvpn
>Total 1 displayed, Up 1, Down 0
>
>Transit LSP: 0 sessions
>Total 0 displayed, Up 0, Down 0
>
>Am i doing something wrong?
>
>Thanks
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>