[j-nsp] Internet access SRX

[Mark Menzies]

Check your nat rules to make sure that this self initiated traffic is being
NATted.  If you have a restrictive nat rule then the traffic from the
firewall may not match the nat rules.

Also check the flows for the pings to see if nat is taking place

show security flow session protocol icmp


On 23 October 2013 08:34, Mohammad Khalil <eng.mssk at gmail.com> wrote:

> Hi all
> I have SRX and I have configured NAT on it with internet access with no
> issues
> My question is when you ping from the SRX itself using source {LAN} there
> is no response even though there is internet access from the LAN clients ,
> in Cisco there is response when you ping from the router or the firewall
> itself ?
>
> BR,
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>