[j-nsp] Internet access SRX

[Per Westerlund]

The normal NAT handling only works with transit traffic, not self-sourced traffic.

With newer Junos, you can set up NAT rules using the zone "junos-host" to get the wanted behaviour.

/Per

> 23 okt 2013 kl. 09:34 skrev Mohammad Khalil <eng.mssk at gmail.com>:
> 
> Hi all
> I have SRX and I have configured NAT on it with internet access with no
> issues
> My question is when you ping from the SRX itself using source {LAN} there
> is no response even though there is internet access from the LAN clients ,
> in Cisco there is response when you ping from the router or the firewall
> itself ?
> 
> BR,
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp