[j-nsp] MX Command

[OBrien, Will]

show chassis fpc is a start.

you can run various diags on the fpc pics themselves as well.

On Oct 25, 2013, at 2:25 PM, Keith wrote:

> Is there a command on JunOS similar to the cisco command:
> 
> show controller utilization
> 
> Thanks,
> Keith
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp