[j-nsp] MX Command

[james jones]

+1


On Fri, Oct 25, 2013 at 3:29 PM, OBrien, Will <ObrienH at missouri.edu> wrote:

> show chassis fpc is a start.
>
> you can run various diags on the fpc pics themselves as well.
>
> On Oct 25, 2013, at 2:25 PM, Keith wrote:
>
> > Is there a command on JunOS similar to the cisco command:
> >
> > show controller utilization
> >
> > Thanks,
> > Keith
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>