[j-nsp] qfx3500

[david.roy at orange.com]

Hello

Yes you can use qfx3500 as a standalone switch.

David

Le 3 sept. 2013 à 21:28, "Robert Hass" <robhass at gmail.com> a écrit :

> Hi
> I'm looking for 1U switch with minimum 48x10GE SFP+ and 2x40GE QSFP.
> I see than QFX3500 can do all what I need - can this switch work alone
> without rest elements of Q-Fabric ?
> 
> If someone already is using this switch can write something about stability
> and problems ?
> 
> Rob
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.