[j-nsp] m10 re-333 latest version of junos

[N. Max Pierson]

I have the 768M flavor and have already upgraded the CF to 2GB. I'm
currently on 8.5 and wanted to get to the latest version for these 2 lab
boxes.

I'll give 10.4 a shot for now.

Thanks for all of the responses!


On Tue, Sep 10, 2013 at 4:10 PM, Jerry Jones <jjones at danrj.com> wrote:

> Depends a lot of which flavor you have with what memory
>
> This RE came with either 246M or 768M of memory and an 80MB flash
>
> *Note: *For M-series, MX-series, and T-series routing platforms, the
> CompactFlash card memory requirement for JUNOS software Release 9.0 is 1
> GB. For M7i and M10i routing platforms with only 256 MB of memory, see the
> Customer Support Center JTAC Technical Bulletin PSN-2007-10-001:
> https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2007-10-001&actionBtn=Search
> .
>
> Hope this helps
>
>
> On Sep 10, 2013, at 2:49 PM, N. Max Pierson <nmaxpierson at gmail.com> wrote:
>
> Hi list,
>
> I have a couple of old m10s with re-333s in them and I would like to
> upgrade them to whatever the last version of Junos code they can run. These
> are lab routers and not production. Can someone point me in the right
> direction? I've seen a few folks say 10.4 will work, but I only see the
> m120, m160, m320 etc on the downloads page. I assume the m120 image would
> work in this case?
>
> Thanks All!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>