[j-nsp] Junos BNG PPPoE inside a VPLS

[Terebizh, Evgeny]

Hi there,
Check out the 13.1 release notes: Configure subscriber interfaces over pseudowire terminations.
Well. They didn't mention VPLS though. 
Please let me know if this helps. 

/Evgeny

________________________________________
From: juniper-nsp [juniper-nsp-bounces at puck.nether.net] on behalf of William Jackson [william.jackson at gibtele.com]
Sent: Tuesday, September 17, 2013 4:39 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Junos BNG PPPoE inside a VPLS

Gents

Theoretical question here:

I currently have a setup where I transport PPPoE frames between my xDSL boxes and a centralised BNG.
I use one vlan tag per xDSL box aggregator box, so all the subs from a specific box have the same vlan tag.

xDSL---->(vlan tagged Eth)-->PE-->MPLS Network-->PE-->(vlan tagged Eth)-->BNG(PPPoE) Termination.

This means that the mpls service I use to send my PPPoE traffic to my centralised BNG ends on the BNGs upstream PE node, and I use a standard vlan-tagging interface between BNG and PE.
I would like to extend the VPLS service to the BNG ( MX platform ), is it possible to interwork the PPPoE termination into the VPLS service?

I cant seem to find anything about a type of setup like this?

Thank you

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp