[j-nsp] Automation of EX code upgrade

[Frank Sweetser]

Jeremy Schulman has put together some ansible playbooks that will let you do 
exactly that, as well as various config pushing bits:

https://github.com/jeremyschulman/ansible-junos-demo

Frank Sweetser fs at wpi.edu    |  For every problem, there is a solution that
Manager of Network Operations   |  is simple, elegant, and wrong.
Worcester Polytechnic Institute |           - HL Mencken

On 9/19/2013 6:04 PM, Mick Burns wrote:
> Hey all,
>
> I am looking for ideas/previous experience in the best way to automate the
> upgrade of multiple (let's say about a hundred units) EX switches in large
> datacenters.  Let's assume here they are a mix of 3200 and 4200 and all of
> them runs the same JunOS release.  Any failure must be quickly identified
> for a manual upgrade.
>
> Any help or advice is much appreciated.
> Mick B.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>