[j-nsp] Automation of EX code upgrade

[Mick Burns]

Thanks to all who answered, your contribution is welcome. This is exactly
the kind of hints that I was looking for.

Cheers,
Mick


On Fri, Sep 20, 2013 at 7:12 AM, Frank Sweetser <fs at wpi.edu> wrote:

>
> Jeremy Schulman has put together some ansible playbooks that will let you
> do exactly that, as well as various config pushing bits:
>
> https://github.com/**jeremyschulman/ansible-junos-**demo<https://github.com/jeremyschulman/ansible-junos-demo>
>
> Frank Sweetser fs at wpi.edu    |  For every problem, there is a solution
> that
> Manager of Network Operations   |  is simple, elegant, and wrong.
> Worcester Polytechnic Institute |           - HL Mencken
>
> On 9/19/2013 6:04 PM, Mick Burns wrote:
>
>> Hey all,
>>
>> I am looking for ideas/previous experience in the best way to automate the
>> upgrade of multiple (let's say about a hundred units) EX switches in large
>> datacenters.  Let's assume here they are a mix of 3200 and 4200 and all of
>> them runs the same JunOS release.  Any failure must be quickly identified
>> for a manual upgrade.
>>
>> Any help or advice is much appreciated.
>> Mick B.
>> ______________________________**_________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
>>
>>  ______________________________**_________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
>