[j-nsp] Junos ospf question

[R S]

basically I've a triangulation A - B - C - A

single area 0

A-B link is 10Gbs
A-C and B-C is 1 Gbs

since in A-B run a very high volume of traffic (storage), I do not want if A-B fails this traffic goes through C

C redistribute as well statics into OSPF

Hope it clear now

Subject: Re: [j-nsp] Junos ospf question
From: p1 at westerlund.se
Date: Wed, 25 Sep 2013 10:23:39 +0200
CC: ipv6freely at gmail.com; juniper-nsp at puck.nether.net
To: dim0sal at hotmail.com

Can you give some more details? I'm not sure I understand all of your requirements.
Are you trying to influence something native to OSPF, or are you talking about setting metrics for routes redistributed (Cisco-speak) from another protocol?
/Per
25 sep 2013 kl. 10:09 skrev R S <dim0sal at hotmail.com>:I understood the same and I need to be able to drop network announcement in a very granular way...