[j-nsp] SSD disks high failure ratio ?

[Mounir Mohamed]

This is not a hardware issue and does not need RMA for the failed REs. They
only need SSD secure erase sequence and a single reboot. However this has
to be performed by Juniper engineers. I recommend to contact your SE and he
will take care about it.

Bear in mind that all MX REs shipped after July 2013 do not have this
issue.


On Wed, Sep 18, 2013 at 6:48 PM, Anhost <jjones at danrj.com> wrote:

> Yes but dont have handy. Easy fix if not in production.
>
> Sent from my iPhone
>
> On Sep 18, 2013, at 10:36 AM, Phil Mayers <p.mayers at imperial.ac.uk> wrote:
>
> > On 18/09/13 16:26, Anhost wrote:
> >> Known issue easily fixed on some shipped in last quarter. Check with
> your Juniper rep and they can ID. Not a hardware issue.
> >
> > Is there a PR or similar?
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>