[j-nsp] SSD disks high failure ratio ?

[Alexandre Snarskii]

On Wed, Sep 18, 2013 at 01:51:29PM +0000, Anders Karlsson wrote:
> Hi,
> 
> It's known Juniper problem. Contact them and they will fix it.

Thanks for clarification. RMA is underway indeed, just wanted to check
if I should expect more failures or it was some irregular spike. 

> 
> /Anders
> 
> 
> > -----Original Message-----
> > From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On
> > Behalf Of Alexandre Snarskii
> > Sent: den 18 september 2013 15:43
> > To: Juniper-NSP Mailing list
> > Subject: [j-nsp] SSD disks high failure ratio ?
> > 
> > 
> > Hi!
> > 
> > Anyone else experienced high failure ratio with SSD disks installed on
> > RE-S-1800x4 or it's just we are that "lucky" to have two disks failed
> > within one week ? :(
> > 
> > PS: and, just to fill the gap in the documentation: these disks are not
> > the usual 2.5" notebook-like, they are 1.8" mSATA, not yet widely used
> > form-factor, so you can't just get replacement from the nearest PC
> > shop.
> > Discovering this after ~400km drive adds more fun :)
> > 
> > --
> > In theory, there is no difference between theory and practice.
> > But, in practice, there is.
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
In theory, there is no difference between theory and practice. 
But, in practice, there is.