[j-nsp] Verifying Juniper ECMP

[Olivier Benghozi]

Hi John,

as usual with Juniper it's ridiculously overcomplicated, David Roy wrote a fine article about that, at least for MX with DPC:
http://www.junosandme.net/article-junos-load-balancing-part-3-troubleshooting-109382234.html


Olivier

Le 15 avr. 2014 à 04:01, John Neiberger <jneiberger at gmail.com> a écrit :
> ​I know that ECMP is, by default, based on a hash of source and destination
> IP address, and I know that we can see the available paths by doing "show
> route forwarding-table destination <prefix>", but is there a way to
> determine which path a particular flow is using?
> 
> For those of you familiar with Cisco, I'm looking for an equivalent to
> "show cef exact-route".