[j-nsp] Full BGP table, one provider w/ 2 routers, slow forwarding convergence
Olivier Benghozi
olivier.benghozi at wifirst.fr
Thu Aug 14 08:23:40 EDT 2014
Hi Clarke,
Are you using some MX80 routers ? :)
regards,
Olivier Benghozi
Wifirst
> In testing the design, my advertisements going out get updated almost immediately with my upstream provider, per looking at their looking glass during a "fiber cut." But on my end, even though BGP starts to change the preference for the incoming routes fairly quickly, it takes a long time to push the changes to the forwarding tables in the PFE. With the full Internet table, I have seen it take up to about 80 to 90 seconds for a few selected routes.
More information about the juniper-nsp
mailing list