[j-nsp] H-QoS support

[sthaug at nethelp.no]

> Can someone please confirm whether or not H-QoS is support on MX5 with a MIC-3D-20GE-SFP?  I can't believe all the searching I've had to do just to figure this out, where the various sources I've found give very confusing and obviously incorrect information about what's supported.  For instance, were you aware that the MX5/MX10/MX40/MX80 routers support 100G interfaces?

H-QoS is supported on the MICs, because these connect to the "Q" side of
the switching ASIC. It is *not* supported on the builtin 10G ports (not
relevant to the MX5 in any case).

The MX5-T-AC and the MX5-T-DC bundles explicitly include a MIC-3D-20GE-SFP
MIC and a S-MX80-Q per-VLAN queuing license.

Agree with your general complaint about the difficulty of finding whether
a particular feature is supported or not...

Steinar Haug, Nethelp consulting, sthaug at nethelp.no