[j-nsp] VLAN's on EX4300 with 13.2X50-D15.3

[Bill Blackford]

Next Gen CLI for layer2. This is the same format as the Layer2 Functions on
the MX. Is this a trend for all EX products or just the NG hardware?


On Wed, Feb 19, 2014 at 2:25 AM, Giuliano Cardozo Medalha <
giuliano at wztech.com.br> wrote:

> ex4300 uses next generation cli for L2
>
> instead of use interface vlan you need to use interface irb
>
> set vlan TEST vlan-id 20 l3-interface irb.20
>
> set interface irb unit 20 family inet address 192.168.20.100/24
>
> and now for port mode ( access x trunk ) you need to use
>
> interface-mode ...
>
> dhcp-relay and rstp changed too ...
>
> set forwarding-options dhcp-relay ... and not helpers anymore
>
> set protocols rstp interface ge-0/0/0
>
> you need to declare every interface under rstp ...
>
> wildcard range set protocols ... helps
>
> wildcard range set interfaces ... too
>
> to see trunk ports
>
> >  show ethernet-switching interface | except untagged |  match tagged
>
>
>
> Sent from my iPhone
>
> > On 19/02/2014, at 00:44, Janusz Wełna <janusz.welna at gmail.com> wrote:
> >
> > Hi,
> >
> >
> > Why when I have below config:
> >
> >  ge-0/0/44 {
> >        description test;
> >        unit 0 {
> >            family ethernet-switching {
> >                vlan {
> >                    members vlan103;
> >                }
> >                storm-control default;
> >
> >   unit 103 {
> >            description test;
> >            family inet {
> >                address 10.46.163.1/29;
> >
> >
> >    vlan103 {
> >        description test;
> >        vlan-id 103;
> >        l3-interface vlan.103;
> >
> >
> >
> >
> > I cannot ping from EX4300 10.46.163.1 and I cannot ping 10.46.163.1 from
> > server connected to ge-0/0/44
> >
> >
> >
> >
> > But when I add below:
> >
> >
> > irb {
> >        unit 103 {
> >            family inet {
> >                address 10.46.163.1/29;
> >
> >
> > and delete :
> >
> >
> > vlan103 {
> >        description SGI;
> >        vlan-id 103;
> >        l3-interface vlan.103
> >
> >
> >
> >
> > ping works correctly.
> >
> >
> > On EX3300, EX4200 and EX2200 I not need setup irb interface, why I need
> on
> > EX4300 ?
> >
> >
> >
> > Br,
> >
> >
> > Janusz
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Bill Blackford

Logged into reality and abusing my sudo privileges.....