[j-nsp] S-NAT-IN-MX5-MX10

[Caillin Bathern]

Yep.  S-NAT-IN-MX5-MX10 is for "inline NAT" on the Trio which is 1:1 NAT with no PAT.  Totally stateless.

For CG-NAT variants you need an MS-MIC service card (MS-MIC-16G) which sits in the back of the MX80 and the correct licence JAA-NAT-1, JAA-NAT-10 or JAA-NAT-100.

Cheers,
Caillin

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Mark Tinka
Sent: Thursday, 9 January 2014 3:52 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] S-NAT-IN-MX5-MX10

On Thursday, January 09, 2014 03:49:29 AM Skeeve Stevens
wrote:

> I wonder if anyone knows more about this license.
> S-NAT-IN-MX5-MX10
> 
> The description says: "INLINE NAT SOFTWARE LICENSE - IT ALLOWS TO RUN 
> NAT FEATURES ON A MX5 OR MX10."
> 
> But I am not sure what that really means.  Is it for LSN/CGN?  Is it 
> needed on top of the service card?

Someone will need to clarify for me here, but if this is the same inline NAT services you get on the bigger chassis, it will only support 1:1 NAT.

Mark.
-- 
This transmission or any part of it is intended solely for the named
addressee.  It is confidential.  The copying or distribution of this
transmission or any information it contains, by anyone other than the
addressee, is prohibited. CommTel Network Solutions cannot be held 
accountable for any comments, statements or attachments.

If you have received this transmission in error, please phone
  +61 3 8340 6100  or by reply e-mail to the sender.  If you are not the
named addressee, you must destroy the original transmission and its contents. 

You may not rely on electronically transmitted material unless 
requested that the transmission is subsequently confirmed by fax or letter.
Material transmitted to you should also be checked by reference 
to a hard copy of that material printed directly from our word processing system.

Message  protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.http://www.mailguard.com.au/mg